404 Not Found

Spamworldpro Mini Shell

Server : Apache
System : Linux server2.corals.io 4.18.0-348.2.1.el8_5.x86_64 #1 SMP Mon Nov 15 09:17:08 EST 2021 x86_64
User : corals ( 1002)
PHP Version : 7.4.33
Disable Function : exec,passthru,shell_exec,system
Directory : /proc/thread-self/root/opt/rh/gcc-toolset-11/root/usr/share/systemtap/examples/

Upload File :

Current File : //proc/thread-self/root/opt/rh/gcc-toolset-11/root/usr/share/systemtap/examples/keyword-index.txt

SYSTEMTAP EXAMPLES INDEX BY KEYWORD
(see also index.txt)

For systemtap version 4.5.

= _BEST =

general/helloworld.stp - SystemTap "Hello World" Program
keywords: _best simple bpf

A basic "Hello World" program implemented in SystemTap script. It
prints out "hello world" message and then immediately exits.

# stap helloworld.stp

general/para-callgraph.stp - Callgraph Tracing with Arguments
keywords: _best trace callgraph

Print a timed per-thread microsecond-timed callgraph, complete with
function parameters and return values. The first parameter names the
function probe points to trace. The optional second parameter names
the probe points for trigger functions, which acts to enable tracing
for only those functions that occur while the current thread is
nested within the trigger.

# stap para-callgraph.stp 'kernel.function("*@fs/proc*.c")' \
'kernel.function("vfs_read")' -c "cat /proc/sys/vm/* || true"

general/varwatch.stp - Watch a Variable Changing Value in a Thread
keywords: _best monitoring

This script places a set of probes (specified by $1), each of which
monitors the state of some context $variable expression (specified by
$2). Whenever the value changes, with respect to the active thread,
the event is traced.

# stap -w varwatch.stp 'kernel.statement("do_sys_open@fs/open.c:*")' \
'$$vars' -T 1

general/whythefail.stp - Why did the function fail?
keywords: speculation monitoring function trace _best

The whythefail.stp script prints a statement-execution trace for a
given function, but only for those runs of the function that ended up
with a (configurable) post-return condition.

# stap whythefail.stp kernel do_sys_open '$return < 0' -c 'cat \
/root/no-such-file || true'

network/netfilter_summary.stp - System-Wide Count of Network Packets by IPs
keywords: _best network traffic

The script watches all IPv4 network traffic on the system. On exit
the script prints a list showing the number of packets sent along
source IP address / destination IP address pair encountered, and the
total number of bytes sent among the pair. The list is ordered from
greatest to least number of packets seen among the source/destination
pairs.

# stap netfilter_summary.stp -T 1

network/netfilter_summary_json.stp - System-Wide Count of Network Packets by IPs
keywords: _best network traffic json

The script watches all IPv4 network traffic on the system. The data
is output in JSON format and includes the number of packets sent
along source IP address / destination IP address pair encountered,
and the total number of bytes sent among the pair.

# stap netfilter_summary_json.stp -T 1

process/cycle_thief.stp - Track IRQ's and Other Processes Stealing Cycles from a Task
keywords: _best process scheduler time tracepoint interrupt

The cycle_thief.stp script instruments the scheduler and IRQ handler
to determine which processes and interrupts are competing with the
specified task for the cpu cycles. This script uses the '-c' or '-x'
options to focus on a specific task. The script output the number of
times the task migrates between processors, histograms showing the
length of time on and off processor, lists of processes running while
the task is off the processor, and the interrupts that occurred while
the task was running.

# stap cycle_thief.stp -T 1

process/proctop.stp - Periodically Print Process Information With History
keywords: process scheduler _best

Every 5 seconds, print out a list of 25 processes that took the most
system time with information about the processes. Includes
information on processes that may have exited while the script was
running. The script contains configuration options listed in the
script source.

# stap proctop.stp -T 1

process/strace.stp - Trace system calls
keywords: _best process syscall

The script loosely emulates strace, when applied to individual
processes or hierarchies (via -c/-x), or the entire system (without
-c/-x). A few output configuration parameters may be set with -G.

# stap strace.stp -c "cat /proc/sys/vm/* || true"

process/thread-business.stp - monitor syscall history
keywords: _best process syscall

Prints a periodic tabular report about the counts of syscall activity
of all threads on the system, along with a textual
recent-syscall-history for each

# stap thread-business.stp -T 10

profiling/fntimes.stp - Show Functions Taking Longer Than Usual
keywords: _best profiling

The fntimes.stp script monitors the execution time history of a given
function family (assumed non-recursive). Each time (beyond a warmup
interval) is then compared to the historical maximum. If it exceeds
a certain threshold (250%), a message is printed.

# stap fntimes.stp 'kernel.function("sys_*")' -T 7

profiling/latencytap.stp - Show Reasons and Durations for Processes Sleeping
keywords: _best profiling

The latencytap.stp script collects data on the intervals processes
are deactivated (sleeping). The script categorizes the reasons for
the sleeps by analyzing the backtraces and displays a sorted list of
the top 20 causes from largest total sum time sleeping to smallest.
The output is updated every 30 seconds. The script needs to be
compiled with the '--all-modules' option to produce reasons for
sleeps caused by modules. Optionally, this script can be used with
the '-c' or '-x' options to focus on a specific PID.

# stap latencytap.stp --all-modules -T 1

profiling/linetimes.stp - Show Time Spent on Each Line of a Function
keywords: profiling _best

The linetimes.stp script takes two arguments: where to find the
function and the function name. linetimes.stp will instrument each
line in the function. It will print out the number of times that the
function is called, a table with the average and maximum time each
line takes, and control flow information when the script exits.

# stap linetimes.stp kernel do_nanosleep -T 1

profiling/pf4.stp - Profile Kernel/User Backtraces
keywords: _best profiling backtrace

The pf4.stp script sets up time-based sampling. Every five seconds it
prints out a sorted list with the top twenty kernel and/or user stack
backtraces (on a per-cpu basis). Use any of --ldd, --all-modules, -d
MODULE, -d /PATH/TO/EXEC to add more symbolic info.

# stap pf4.stp -T 6 --all-modules --ldd

profiling/thread-times.stp - Profile Kernel Functions
keywords: _best profiling

The thread-times.stp script sets up time-based sampling. Every five
seconds it prints out a sorted list with the top twenty threads
occupying the CPUs, broken down as a percentage of user and kernel
time.

# stap thread-times.stp -T 1

stapgames/2048.stp - 2048
keywords: _best stapgames

The modern classic 2048 sliding-tiles game, using local keyboard and
ansi animation.

# stap -p4 2048.stp

virtualization/kvm_service_time.stp - Time Statistics on KVM Exit Reasons
keywords: _best virtualization kvm

The kvm_service_time.stp script tracks the statistics about the
amount of time that the processor left the guest virtual machine for
each exit reason (for example fixing up a page table or handling an
IO operation). When the script exits it prints out the number of
times each exit reason was encountered, the total duration of time it
left the guest VM, the minimum time, the average time, and the
maximum time in microseconds for that exit reason. On Linux 2.6.38
and newer kernel the script can automatically determine whether it is
running on Intel or AMD processors. For older kernels with a
kernel.trace("kvm_exit") tracepoint that does not have the $isa
parameter you can explicitly state the kvm type with a "-G kvm=intel"
or "-G kvm=amd" on the command line.

# stap kvm_service_time.stp -T 1

= APPLICATION =

apps/libguestfs_log.stp - Trace libguestfs startup
keywords: application trace bpf

The libguestfs_log.stp script prints a log of when various
libgueststartup steps are encountered. The first column is
microseconds since the script started. The second column is the time
elapsed in microseconds between the previous and current events and
the third column is the event name.

# stap libguestfs_log.stp -T 1

apps/stap_time.stp - Provide elapsed times for Passes of SystemTap script compilation
keywords: application trace

SystemTap has multiple passes to convert the text of a SystemTap
script into instrumentation that actually collect data on the system.
The stap_time.stp script uses the markers in SystemTap to note the
amount of time that each of the passes requires. When SystemTap
completes pass 4 (compiling the instrumentation into a kernel module)
the script print out the script name followed by the amount of time
in milliseconds required for Pass 0 (command line option parsing),
Pass 1 (script parsing), Pass 2 (elaboration), Pass 3 (code
generation), and Pass 4 (module compilation). The resulting data can
be analyzed to determine if there are issues with the amount of time
that systemtap takes to generate instrumentation.

# stap stap_time.stp -T 1

= BACKTRACE =

general/watchdog.stp - Watchdog Timer for Arbitrary Events
keywords: watchdog backtrace

The watchdog.stp script provides a watchdog timer mechanism for
arbitrary events. The script takes three arguments: the events to
start watchdog timer, the event to stop the watchdog timer, and the
time in millseconds for the watchdog. If the watchdog timer is
exceed, the script will trigger a stack backtrace of the user-process
that timed out using pstack. This script can be used to diagnose what
the userspace application is doing when a slower than expected
operation occurs.

# stap watchdog.stp 'syscall.nanosleep' 'syscall.nanosleep.return' 1000 \
-T 1

interrupt/scf.stp - Tally Backtraces for Inter-Processor Interrupt
keywords: interrupt backtrace

The Linux kernel function smp_call_function causes expensive
inter-processor interrupts (IPIs). The scf.stp script tallies the
processes and backtraces causing the interprocessor interrupts to
identify the cause of the expensive IPI. On exit the script prints
the tallies in descending frequency.

# stap scf.stp -T 1

io/io_submit.stp - Tally Reschedule Reason During AIO io_submit Call
keywords: io backtrace

When a reschedule occurs during an AIO io_submit call, accumulate the
traceback in a histogram. When the script exits prints out a sorted
list from most common to least common backtrace.

# stap io_submit.stp -T 1

memory/last_100_frees.stp - Log recent free(3) calls.
keywords: memory process backtrace

This script reports on the last few free(3) libc calls done by
processes (possibly restricted by stap -x/-c), along with a userspace
backtrace at those moments.

# stap last_100_frees.stp -c "stap -V" -d `which stap` --ldd

process/auditbt.stp - Generate backtraces for kernel audit events
keywords: monitoring security backtrace

Attaches to the kernel audit-log paths (also used by libaudit), and
log every record being sent, along with a user-space backtrace of the
process that caused it.

# stap auditbt.stp -d /usr/bin/sudo --ldd -c "sudo true"

process/pstrace_exec.stp - Print trace of process ancestors for matching exec commands
keywords: process backtrace

The pstrace_exec.stp script watches each exec operation. If the exec
contains a substring that matches the script's command-line argument,
it prints out that process and all of its ancestors.

# stap pstrace_exec.stp -T 1 bash

process/sleepingBeauties.stp - Generate Backtraces of Threads Waiting for IO Operations
keywords: io scheduler backtrace

The script monitors the time that threads spend in waiting for IO
operations (in "D" state) in the wait_for_completion function. If a
thread spends over 10ms, its name and backtrace is printed, and later
so is the total delay.

# stap sleepingBeauties.stp -T 1

profiling/pf4.stp - Profile Kernel/User Backtraces
keywords: _best profiling backtrace

# stap pf4.stp -T 6 --all-modules --ldd

= BPF =

apps/libguestfs_log.stp - Trace libguestfs startup
keywords: application trace bpf

# stap libguestfs_log.stp -T 1

general/ansi_colors.stp - Color Table for ansi_set_color()
keywords: format bpf

The script prints a table showing the available color combinations
for the ansi_set_color() function in the ansi.stp tapset.

# stap ansi_colors.stp

general/ansi_colors2.stp - Show Attribues in Table for ansi_set_color()
keywords: format bpf

The script prints a table showing the available attributes (bold,
underline, and inverse) with color combinations for the
ans_set_color() function in the ansi.stp tapset.

# stap ansi_colors2.stp

general/helloworld.stp - SystemTap "Hello World" Program
keywords: _best simple bpf

A basic "Hello World" program implemented in SystemTap script. It
prints out "hello world" message and then immediately exits.

# stap helloworld.stp

general/sizeof.stp - Print the Size of a C Type
keywords: statistics memory bpf

This script prints the size of a type, based on dwarf debuginfo for
any kernel or userspace module, or trial-compilation of a given
header file name.

# stap sizeof.stp FILE '</usr/include/stdio.h>'

memory/cachestat.stp - Count Page Cache Hits and Misses
keywords: memory bpf

Monitors hits and misses to the page cache and reports a count every
5 seconds. Based on a bpftrace tool by David Valin.

# stap cachestat.stp -T 1

memory/mmfilepage.stp - Track Virtual Memory System Actions on File Backed Pages
keywords: memory bpf

The mmfilepage.stp script uses the virtual memory tracepoints
available in some kernels to track the number of faults, copy on
writes mapping, and unmapping operations for file backed pages. When
the script is terminated the counts are printed for each process that
allocated pages while the script was running. The mmfilepage.stp
script is useful in debugging leaks in the mapped file regions of a
process.

# stap mmfilepage.stp -T 1

memory/mmwriteback.stp - Track Virtual Memory System Writing to Disk
keywords: memory bpf

The mmwriteback.stp script uses the virtual memory tracepoints
available in some kernels to report all of the file writebacks that
occur form kupdate, pdflush and kjournald while the script is
running. It's useful in determining where writes are coming from on
a supposedly idle system that is experiencing unexpected IO.

# stap mmwriteback.stp -T 1

network/sk_stream_wait_memory.stp - Track Start and Stop of Processes Due to Network Buffer Space
keywords: network tcp process bpf

The sk_stream-wait_memory.stp prints a time stamp, executable, and
pid each time a process blocks due to the send buffer being full. A
similar entry is printed each time a process continues because there
is room in the buffer.

# stap sk_stream_wait_memory.stp -T 1

profiling/syscallsrw.stp - Provide a tally of read and write syscalls run on the system
keywords: prometheus syscall bpf

The syscallsrw.stp script tallies the read and write syscalls. This
is a demo script for stapbpf prometheus-exporter scripts.

= CALLGRAPH =

general/callgraph.stp - Callgraph Tracing
keywords: simple trace callgraph

Print a timed per-thread microsecond-timed nested callgraph. The
first parameter names the function probe points to trace.

# stap callgraph.stp 'kernel.function("*@fs/proc*.c")' -c "cat \
/proc/sys/vm/* || true"

general/para-callgraph-verbose.stp - Callgraph Tracing with Verbose Arguments
keywords: trace callgraph

Print a timed per-thread microsecond-timed callgraph, complete with
pretty-printed function parameters and return values. The first
parameter names the function probe points to trace. The optional
second parameter names the probe points for trigger functions, which
acts to enable tracing for only those functions that occur while the
current thread is nested within the trigger.

# stap para-callgraph-verbose.stp 'kernel.function("*@fs/proc*.c")' \
'kernel.function("vfs_read")' -c "cat /proc/sys/vm/* || true"

general/para-callgraph.stp - Callgraph Tracing with Arguments
keywords: _best trace callgraph

# stap para-callgraph.stp 'kernel.function("*@fs/proc*.c")' \
'kernel.function("vfs_read")' -c "cat /proc/sys/vm/* || true"

general/tcl-trace.stp - Callgraph Tracing of Tcl code
keywords: callgraph

Print a timed per-thread microsecond-timed callgraph of executing Tcl
code.

# stap tcl-trace.stp -T 5

= CONTAINER =

profiling/container_check.stp - Monitor capabilities and syscalls used by a process and it children
keywords: profiling container syscall

The container_check.stp script monitors the use of linux capablities
and optionally forbidden syscalls by a process and its children. On
exit the script prints out lists showing the capabilies used by each
executable, which syscall used specific capabilites for each
executable, a list of forbidden syscalls used, and details on any
syscalls that failed during monitoring. This script is designed to
help diagnose issues caused by restricted capabilies and syscalls
when running an application in a container. If the script warns
about skipped probes, the number of active kretprobes may need to be
increased with "-DKRETACTIVE=100" option on the command line

# stap container_check.stp -c "ping -c 1 sourceware.org || true"

= DIAGRAM =

process/pstree.stp - Generates a process diagram in DOT form.
keywords: process diagram

The pstree.stp script generates a process diagram in DOT form. For
instance, it may be useful on a 'make' command to see all the
processes that are started.

# stap pstree.stp -T 1

= DISK =

io/deviceseeks.stp - Histograms of Seek Behavior for Each Device
keywords: disk

The deviceseeks.stp script generates a periodic histogram showing the
frequency of different sized seeks (in sectors) on each device, or
optional given device-name regexp

# stap deviceseeks.stp -T 1 sda

io/disktop.stp - Summarize Disk Read/Write Traffic
keywords: disk

Get the status of reading/writing disk every 5 seconds, output top
ten entries during that period.

# stap disktop.stp -T 1

io/enospc.stp - Report an disk out-of-space condition.
keywords: disk filesystem

This script monitors a filesystem implementations for early internal
indications of ENOSPC, and reports these to the system logger and the
systemtap console.

# stap enospc.stp -T 1

io/mbrwatch.stp - Monitor Read/Write of the Boot Sector Area of Block Devices
keywords: io monitoring disk simple

The mbrwatch.stp script reports any attempted reads/writes of the
first few sectors of a raw block device.

# stap mbrwatch.stp -c "dd of=/dev/null count=1 if=/dev/`grep -v major \
/proc/partitions | grep . | grep -v 'sr[0-9]' | awk '{print $4}' | \
head -1`"

network/nfsd_unlink.stp - Find Which Client Is Removing NFS Files on Server
keywords: nfs disk

The nfsd_unlink.stp script lists the ip address and file name each
time time a file is being removed or unlinked by the nfsd. This
script is run on the nfs server.

# stap nfsd_unlink.stp -T 1

= DYNINST =

apps/php-trace.stp - Tracing of PHP code execution
keywords: trace dyninst

Trace of executing PHP code using the enabled markers.

# stap php-trace.stp -c 'php -f hello.php'

= FILE =

io/iotime.stp - Trace Time Spent in Read and Write for Files
keywords: profiling syscall io file

The script watches each open, close, read, and write syscalls on the
system. For each file the scripts observes opened it accumulates the
amount of wall clock time spent in read and write operations and the
number of bytes read and written. When a file is closed the script
prints out a pair of lines for the file. Both lines begin with a
timestamp in microseconds, the PID number, and the executable name in
parentheses. The first line with the "access" keyword lists the file
name, the attempted number of bytes for the read and write
operations. The second line with the "iotime" keyword list the file
name and the number of microseconds accumulated in the read and write
syscalls.

# stap iotime.stp -T 1

process/pfiles.stp - Print Process File Descriptors
keywords: process file

Run pfiles.stp to produce a human-readable summary of all open file
descriptors of a given process. Specify the process-id as -x PID for
fastest performance.

# stap -g pfiles.stp -x $$

= FILESYSTEM =

general/badname.stp - Bad Filename Filter
keywords: filesystem guru

The badname.stp script shows how one could prevent the creation of
files with undesirable names using guru mode.

# stap -g badname.stp -c "touch /tmp/myXXXbadnameXXXfile.$$ 2>&1 | grep \
denied"

io/enospc.stp - Report an disk out-of-space condition.
keywords: disk filesystem

This script monitors a filesystem implementations for early internal
indications of ENOSPC, and reports these to the system logger and the
systemtap console.

# stap enospc.stp -T 1

lwtools/fslatency-nd.stp - Measure the distribution of file system synchronous read and write latency (non-debuginfo)
keywords: io filesystem

This dynamically traces two common file system functions:
do_sync_read() and do_sync_write(), and reports a histogram
distribution of latency. Many, but not all, file systems and
workloads use these functions. Tracing their time provides one view
of suffered file system latency.

# stap fslatency-nd.stp 1 1

lwtools/fsslower-nd.stp - Trace slow file system synchronous reads and writes (non-debuginfo)
keywords: io filesystem

This dynamically traces two common file system functions:
do_sync_read() and do_sync_write(), and shows details of each call
that is slower than a threshold. Many, but not all, file systems and
workloads use these functions. Tracing their time provides one view
of suffered file system latency.

# stap fsslower-nd.stp -T 1

= FLOATINGPOINT =

general/floatingpoint.stp - SystemTap "Floating Point" Program
keywords: simple floatingpoint

A basic "Floating Point" program implemented in SystemTap script. It
extracts floating point from benchmark-sdt section in main.cxx and
takes one pseudo floating point, printing out results of various
simple floating point operations.

# stap floatingpoint.stp -c "stap --benchmark-sdt"

= FORMAT =

general/ansi_colors.stp - Color Table for ansi_set_color()
keywords: format bpf

The script prints a table showing the available color combinations
for the ansi_set_color() function in the ansi.stp tapset.

# stap ansi_colors.stp

general/ansi_colors2.stp - Show Attribues in Table for ansi_set_color()
keywords: format bpf

The script prints a table showing the available attributes (bold,
underline, and inverse) with color combinations for the
ans_set_color() function in the ansi.stp tapset.

# stap ansi_colors2.stp

= FUNCTION =

general/func_time_stats.stp - Function Time Statistics
keywords: function statistics

The func_time_stats.stp script tracks the wall clock time for each
invocation of the function probe listed as the first command line
argument. When the script exits it prints out the minimum, average,
and maximum times in microseconds followed by a count of times that
the function was called and a histogram showing the distributions of
times.

# stap func_time_stats.stp 'syscall.read' -T 1

general/whythefail.stp - Why did the function fail?
keywords: speculation monitoring function trace _best

The whythefail.stp script prints a statement-execution trace for a
given function, but only for those runs of the function that ended up
with a (configurable) post-return condition.

# stap whythefail.stp kernel do_sys_open '$return < 0' -c 'cat \
/root/no-such-file || true'

profiling/functioncallcount.stp - Count Times Functions Are Called
keywords: profiling function

The functioncallcount.stp script takes one argument, a list of
functions to probe. The script will run and count the number of times
that each of the functions on the list is called. On exit the script
will print a sorted list from most frequently to least frequently
called function.

# stap -w functioncallcount.stp "*@mm/*.c" -T 1

profiling/sched_switch.stp - Display the Task Switches Happening in the Scheduler
keywords: profiling function

The sched_switch.stp script takes two arguments, first argument can
be "pid" or "name" to indicate what is being passed as second
argument. The script will trace the process based on pid/name and
print the scheduler switches happening with the process. If no
arguments are passed, it displays all the scheduler switches. This
can be used to understand which tasks schedule out the current
process being traced, and when it gets scheduled in again.

# stap sched_switch.stp -T 1

= FUTEX =

process/futexes.stp - System-Wide Futex Contention
keywords: syscall locking futex

The script watches the futex syscall on the system. On exit the
futex's address, the number of contentions, and the average time for
each contention on the futex are printed from lowest pid number to
highest.

# stap futexes.stp -T 1

process/futexes2.stp - System-Wide Shared Futex Contention
keywords: syscall locking futex

The script watches just shared futex syscalls on the system. On exit
the futex's key, the number of contentions, and the average time for
each contention on the futex are printed from lowest pid number to
highest.

# stap futexes2.stp -T 1

= GURU =

general/badname.stp - Bad Filename Filter
keywords: filesystem guru

The badname.stp script shows how one could prevent the creation of
files with undesirable names using guru mode.

# stap -g badname.stp -c "touch /tmp/myXXXbadnameXXXfile.$$ 2>&1 | grep \
denied"

general/keyhack.stp - Hack the keyboard
keywords: simple guru

This script makes it appear that one's keyboard is broken, by
changing keycodes at the kernel device driver level. Annoy your
friends!

# stap -g keyhack.stp -c 'sleep 5'

io/eatmydata.stp - disable fsync
keywords: io guru simple

Suppresses fsync() syscalls from processes identified by stap -c/-x
by turning them into presumed-faster fsync() on some dummy or other
file descriptor

# stap -g eatmydata.stp -c 'strace ls || true'

io/ttyspy.stp - Monitor TTY Typing
keywords: io tty monitoring guru

The ttyspy.stp script uses tty_audit hooks to monitor recent typing
activity on the system, printing a scrolling record of recent
keystrokes, on a per-tty basis.

# stap --skip-badvars -g ttyspy.stp -T 1

network/netfilter_drop.stp - System-Wide Network Packet Dropping Tool
keywords: network packets guru

The script drops the specified number of packets of the specified
protocol. Valid protocols are TCP, UDP, or ALL. If ALL is specified,
all incoming packets are dropped. The number of packets to drop can
be specified with a positive integer. A value of 0 indicates that
packets should be dropped until the user manually exits.

# stap -g netfilter_drop.stp TCP 1 -T 2

network/tcp_init_cwnd.stp - Increase Initial TCP Congestion Window to 10
keywords: network tcp socket guru

Run the tcp_init_cwnd.stp script in the background to override a
kernel's default tcp cwnd value to 10, which has been found to
improve latency for web server type workloads. The script prints a
count of cwnd value changes when it is stopped.

# stap -g tcp_init_cwnd.stp -T 1

process/noptrace.stp - Disable ptrace from Hierarchies of Processes
keywords: process security guru

Blocks ptrace(2) attempts from processes identified by stap -c/-x, as
also specifiable from /proc/systemtap/stap_XXX/ control files.
Processes may be added or removed from the blocked list.

# stap -g noptrace.stp -c 'strace ls || true'

process/threadstacks.stp - Override default new-pthread stack sizes
keywords: thread guru

Overrides default NPTL pthread_create stack size for all new threads
created by target processes. Reports one line per process when the
related glibc variable __default_stacksize is updated. Moot for
glibc versions that support $LIBC_PTHREAD_DEFAULT_STACKSIZE_NP.

# stap -g threadstacks.stp -Gsize=65536 -T 1 -d `which stap`

security-band-aids/cve-2008-0600.stp - cve-2008-0600 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2011-4127.stp - cve-2011-4127 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2012-0056.stp - cve-2012-0056 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2013-2094.stp - cve-2013-2094 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2014-7169.stp - cve-2014-7169 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2015-0235.stp - cve-2015-0235 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2015-3456.stp - cve-2015-3456 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2015-7547.stp - cve-2015-7547 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2016-0728.stp - cve-2016-0728 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2016-5195.stp - cve-2016-5195 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2017-6074.stp - cve-2017-6074 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2018-1000001.stp - cve-2018-1000001 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2018-14634.stp - cve-2018-14634 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

security-band-aids/cve-2018-6485.stp - cve-2018-6485 security band-aid
keywords: security guru

historical emergency security band-aid, for reference/education only

= INTERACTIVE =

general/eventcount.stp - Interactive Count Specified Events
keywords: interactive statistics thread process

The script periodically prints a count of specified events and their
related tid's over the course of execution. Numerous configuration
options exist to control filtering / reporting, some of which can be
modified at runtime. See the script source for more information.

# stap eventcount.stp 'syscall_any' -c 'sleep 3'

general/sizeof_interactive.stp - Interactive Print the Size of a C Type
keywords: statistics memory interactive

This script prints the size of a type, based on dwarf debuginfo for
any kernel or userspace module, or trial-compilation of a given
header file name. Types and corresponding locations are provided to
the script at runtime via keyboard input. The format of the input is
identical to that of sizeof.stp (see script source for more
information). Types and locations can be repeatedly given until the
process is terminated.

# echo "FILE '</usr/include/stdio.h>'" | stap sizeof_interactive.stp -T 1

= INTERRUPT =

interrupt/interrupts-by-dev.stp - Record Interrupts on a Per-Device Basis
keywords: interrupt

The interrupts-by-dev.stp script profiles interrupts received by each
device per 100 ms.

# stap interrupts-by-dev.stp -T 1

interrupt/scf.stp - Tally Backtraces for Inter-Processor Interrupt
keywords: interrupt backtrace

# stap scf.stp -T 1

process/cycle_thief.stp - Track IRQ's and Other Processes Stealing Cycles from a Task
keywords: _best process scheduler time tracepoint interrupt

# stap cycle_thief.stp -T 1

= IO =

general/alias_suffixes.stp - Count I/O Syscalls using Alias Suffixes
keywords: io statistics

alias_suffixes.stp is a demonstration of how alias suffixes in the
systemtap language might be used. The script tracks the wall clock
time for each invocation of the system calls open, close, read, and
write. When the script exists it prints out the minimum, average, and
maximum times in microseconds for each system call, followed by a
count of times that each syscall was invoked and a histogram showing
the distributions of times.

# stap alias_suffixes.stp -T 1

io/capture_ssl_master_secrets.stp - Capture SSL/TLS master secrets from gnutls and openssl users
keywords: io monitoring

Capture SSL/TLS master secrets from gnutls and openssl users for easy
traffic decryption

# stap capture_ssl_master_secrets.stp -c 'sleep 3'

io/eatmydata.stp - disable fsync
keywords: io guru simple

Suppresses fsync() syscalls from processes identified by stap -c/-x
by turning them into presumed-faster fsync() on some dummy or other
file descriptor

# stap -g eatmydata.stp -c 'strace ls || true'

io/inodewatch.stp - Monitoring Reads and Writes to a File
keywords: io

The inodewatch.stp outputs the executable name and process id each
time a read or write occurs to the specified inode on the specified
major/minor device.

# stap inodewatch.stp 0x08 0x01 100 -T 1

io/inodewatch2.stp - Monitoring Attribute Changes to a File
keywords: io

The inodewatch2.stp script outputs the executable name, process id,
and attributes each time the attributes are changed on the specified
inode on the specified major/minor device.

# stap inodewatch2.stp 0x08 0x01 100 -T 1

io/io_submit.stp - Tally Reschedule Reason During AIO io_submit Call
keywords: io backtrace

When a reschedule occurs during an AIO io_submit call, accumulate the
traceback in a histogram. When the script exits prints out a sorted
list from most common to least common backtrace.

# stap io_submit.stp -T 1

io/ioblktime.stp - Average Time Block IO Requests Spend in Queue
keywords: io

The ioblktime.stp script tracks the amount of time that each block IO
requests spend waiting for completion. The script computes the
average waiting time for block IO per device and prints list every 10
seconds. In some cases there can be too many outstanding block IO
operations and the script may exceed the default number of
MAXMAPENTRIES allowed. In this case the allowed number can be
increased with "-DMAXMAPENTRIES=10000" option on the stap command
line.

# stap ioblktime.stp -T 1

io/iodevstats.stp - List Executables Reading and Writing the Most Data by Device
keywords: io profiling

The iodevstats.stp script measures the amount of data successfully
read and written by all the executables for each io device on the
system. The output is sorted from greatest sum of bytes read and
written to a device by an executable to the least. The output
contains device major/minor number, the count of operations (reads
and writes), the totals and averages for the number of bytes read and
written.

# stap iodevstats.stp -T 1

io/iostat-scsi.stp - IO Statistics for SCSI Devices
keywords: io profiling scsi

The iostat-scsi.stp script provides a breakdown of the number of blks
read and written on the machine's various SCSI devices. The script
takes one argument which is the number of seconds between reports.

# stap -g iostat-scsi.stp 1 -T 1

io/iostats.stp - List Executables Reading and Writing the Most Data
keywords: io profiling

The iostat.stp script measures the amount of data successfully read
and written by all the executables on the system. The output is
sorted from most greatest sum of bytes read and written by an
executable to the least. The output contains the count of operations
(opens, reads, and writes), the totals and averages for the number of
bytes read and written.

# stap iostats.stp -T 1

io/iotime.stp - Trace Time Spent in Read and Write for Files
keywords: profiling syscall io file

# stap iotime.stp -T 1

io/iotop.stp - Periodically Print IO Activity by Process Name
keywords: io

Every five seconds print out the top ten executables generating I/O
traffic during that interval sorted in descending order.

# stap iotop.stp -T 1

io/mbrwatch.stp - Monitor Read/Write of the Boot Sector Area of Block Devices
keywords: io monitoring disk simple

The mbrwatch.stp script reports any attempted reads/writes of the
first few sectors of a raw block device.

# stap mbrwatch.stp -c "dd of=/dev/null count=1 if=/dev/`grep -v major \
/proc/partitions | grep . | grep -v 'sr[0-9]' | awk '{print $4}' | \
head -1`"

io/nfs_func_users.stp - Tally the Number of NFS Functions Used by Each Process
keywords: io profiling

The nfs_func_users.stp script counts the uses of NFS functions in the
kernel on a per process bases. The output is sorted from the process
with the greatest number of NFS functions called to the least. The
output contains the executable name, the process number, and the
total number of NFS functions called by the process.

# stap nfs_func_users.stp -T 1

io/slowvfs.stp - Trace slow vfs opens.
keywords: io simple

This script prints a line for every kernel vfs_open operation that
takes longer than a configurable number of microseconds. Highly
contended or remote filesystems are likelier to hit this.

# stap slowvfs.stp -G sloth=10 -c 'find /proc >/dev/null || true'

io/switchfile.stp - Switch log files
keywords: io

Every second print a log message and switch log files every 5
seconds.

# stap -o /tmp/switchfile.stp.out switchfile.stp -T 8

io/traceio.stp - Track Cumulative IO Activity by Process Name
keywords: io

Every second print out the top ten executables sorted in descending
order based on cumulative I/O traffic observed.

# stap traceio.stp -T 1

io/traceio2.stp - Watch IO Activity on a Particular Device
keywords: io

Print out the executable name and process number as reads and writes
to the specified device occur.

# stap traceio2.stp 0x0801 -T 1

io/ttyspy.stp - Monitor TTY Typing
keywords: io tty monitoring guru

The ttyspy.stp script uses tty_audit hooks to monitor recent typing
activity on the system, printing a scrolling record of recent
keystrokes, on a per-tty basis.

# stap --skip-badvars -g ttyspy.stp -T 1

lwtools/biolatency-nd.stp - Measure block I/O latency distribution (non-debuginfo)
keywords: io

This measures block I/O latency (storage I/O, ie, disk I/O), and
shows the distribution as a histogram. This can be useful to identify
the characteristics of I/O latency, beyond the averages shown by
iostat(1). For example, to study I/O latency outliers, or multi-modal
distributions.

# stap biolatency-nd.stp 1 1

lwtools/bitesize-nd.stp - Measure block I/O size distribution (non-debuginfo)
keywords: io

This uses the kernel tracepoint block_rq_insert to read the size of
I/O. The output includes the name of the process or thread that was
on-CPU when the I/O request was inserted on the issue queue.

# stap bitesize-nd.stp -T 1

lwtools/execsnoop-nd.stp - Trace process exec() with command line argument details (non-debuginfo)
keywords: io

This can identify if CPU is consumed by short-lived processes, by
tracing new process execution. It works by tracing exec() from the
fork()->exec() sequence, which means it will not catch new processes
that only fork(). It will also show every exec(), including those if
a process re-execs.

# stap execsnoop-nd.stp -T 1

lwtools/fslatency-nd.stp - Measure the distribution of file system synchronous read and write latency (non-debuginfo)
keywords: io filesystem

# stap fslatency-nd.stp 1 1

lwtools/fsslower-nd.stp - Trace slow file system synchronous reads and writes (non-debuginfo)
keywords: io filesystem

# stap fsslower-nd.stp -T 1

lwtools/killsnoop-nd.stp - Trace kill() signals showing process and signal details (non-debuginfo)
keywords: io

This traces signals system-wide, including those sent by the kill(1)
command, and shows various details.

# stap killsnoop-nd.stp -T 1

lwtools/opensnoop-nd.stp - Trace open() syscalls showing filenames (non-debuginfo)
keywords: io

This traces the open() syscall system-wide, to show which files are
being opened, and by who.

# stap opensnoop-nd.stp -T 1

lwtools/rwtime-nd.stp - Summarize read() and write() syscall latency (non-debuginfo)
keywords: io

This traces read() and write() syscalls, producing a histogram
summary of their durations (aka latencies).

# stap rwtime-nd.stp -T 1

lwtools/syscallbypid-nd.stp - Count syscalls with process details (non-debuginfo)
keywords: io

This traces syscalls system-wide, and produces a summary report
showing their counts by process ID, process name, and syscall types.

# stap syscallbypid-nd.stp -T 1

process/sleepingBeauties.stp - Generate Backtraces of Threads Waiting for IO Operations
keywords: io scheduler backtrace

# stap sleepingBeauties.stp -T 1

virtualization/qemu_io.stp - Tally the Number of User-Space QEMU IO on Each IO Port
keywords: virtualization qemu kvm io

The qemu_io.stp script tallies the number of times each of the IO
port on the guest virtual machines is touched by a input or output
operation. When the script exits, it prints a count of the number of
times each IO port read and written.

# stap qemu_io.stp -T 1

= JSON =

network/net_xmit_json.stp - Tracks time between packet queue and transmit.
keywords: network statistics json

This script tracks time between packet queue and transmit. The
information is provided to userspace via procfs in JSON format.

# stap net_xmit_json.stp -T 1

network/netfilter_summary_json.stp - System-Wide Count of Network Packets by IPs
keywords: _best network traffic json

# stap netfilter_summary_json.stp -T 1

= KVM =

virtualization/kvm_service_time.stp - Time Statistics on KVM Exit Reasons
keywords: _best virtualization kvm

# stap kvm_service_time.stp -T 1

virtualization/qemu_count.stp - Tally the Number of User-Space QEMU Events
keywords: virtualization qemu kvm

The qemu_count.stp script tallies the number of times each of the
user-space qemu probepoints is encountered. When the script exits, it
prints a list of the number of times each user-space qemu probepoint
is encountered.

# stap qemu_count.stp -T 1

virtualization/qemu_io.stp - Tally the Number of User-Space QEMU IO on Each IO Port
keywords: virtualization qemu kvm io

# stap qemu_io.stp -T 1

= LIMITS =

general/cpu_throttle.stp - Monitor Intel processors for throttling due to power or thermal limits
keywords: prometheus limits

Intel processors have hardware mechanisms that will reduce the
effective processors speed to avoid exceeding set thermal or power
constraints. The cpu_throttle.stp script monitors when CPU throttling
occurs and accumulates the amount of time in milliseconds that each
processor is throttled. The script makes the information available
via procfs in Prometheus readable format.

# stap cpu_throttle.stp -T 1

memory/overcommit.stp - Log Failed Process Memory Allocation Due to Overcommit Limits
keywords: memory limits

The overcommit.stp script prints a line each time the kernel refuses
a memory allocation request from a process because of
/proc/sys/vm/overcommit* limits.

# stap overcommit.stp -T 1

process/rlimit_nofile.stp - Trace processes running out of file descriptors
keywords: limits

This script watches processes being scheduled and which try to
allocate a file descriptor without luck.

# stap rlimit_nofile.stp -T 1

= LOCKING =

locks/bkl.stp - Tracing Contention on Big Kernel Lock
keywords: locking

The bkl.stp script can help determine whether the Big Kernel Lock
(BKL) is causing serialization on a multiprocessor system due to
excessive contention of the BKL. The bkl.stp script takes two
arguments. The first one is optional, and used to enable backtraces,
and print them once a process has been holding the BKL for a user
specified number of nseconds is reached. The second option is
compulsory and is the number of processes waiting for the Big Kernel
Lock (BKL). When the number of processes waiting for the BKL is
reached or exceeded, the script will print a time stamp, the number
of processes waiting for the BKL, the holder of the BKL, and the
amount of time the BKL was held. If backtraces are enabled, a
backtrace will be printed as well.

# stap bkl.stp -T 1 1

locks/bkl_stats.stp - Per Process Statistics on Big Kernel Lock Use
keywords: locking

The bkl_stats.stp script can indicate which processes have excessive
waits for the Big Kernel Lock (BKL) and which processes are taking
the BKL for long periods of time. The bkl_stats.stp script prints
lists of all the processes that require the BKL. Every five seconds
two tables are printed out. The first table lists the processes that
waited for the BKL followed by the number of times that the process
waited, the minimum time of the wait, the average and the maximum
time waited. The second table lists has similar information for the
time spent in holding the lock for each of the processes.

# stap bkl_stats.stp -T 1

process/futexes.stp - System-Wide Futex Contention
keywords: syscall locking futex

# stap futexes.stp -T 1

process/futexes2.stp - System-Wide Shared Futex Contention
keywords: syscall locking futex

# stap futexes2.stp -T 1

process/mutex-contention.stp - pthread mutex contention analysis
keywords: locking

Tracks pthread-mutex initialization/use and underlying futex
operations, to identify (with backtraces/symbol-names) the mutexes
suffering most contention. Invoke with "-d SHLIB --ldd", perhaps
with -DMAXMAPENTRIES=NNNN for some large NNNN, if the arrays overflow
due to heavy activity.

# stap mutex-contention.stp -T 1

process/semop-watch.stp - Watch semop(2)/semtimedop(2) operations
keywords: process locking

Prints a timed trace of semop(2)/semtimedop(2) syscalls

# stap semop-watch.stp -c 'sleep 2'

= MEMORY =

general/sizeof.stp - Print the Size of a C Type
keywords: statistics memory bpf

This script prints the size of a type, based on dwarf debuginfo for
any kernel or userspace module, or trial-compilation of a given
header file name.

# stap sizeof.stp FILE '</usr/include/stdio.h>'

general/sizeof_interactive.stp - Interactive Print the Size of a C Type
keywords: statistics memory interactive

# echo "FILE '</usr/include/stdio.h>'" | stap sizeof_interactive.stp -T 1

memory/cachestat.stp - Count Page Cache Hits and Misses
keywords: memory bpf

Monitors hits and misses to the page cache and reports a count every
5 seconds. Based on a bpftrace tool by David Valin.

# stap cachestat.stp -T 1

memory/glibc-malloc.stp - Overview glibc malloc internal operations
keywords: memory process

This script reports on internal statistics of the glibc malloc
implementation, as used by a process restricted by stap -x/-c

# stap glibc-malloc.stp -c 'stap --dump-functions'

memory/hugepage_clear_delays.stp - Summarize the time each process spends clearing huge pages
keywords: memory

When a huge page is initially used by a process it must be cleared of
its original contents to avoid leaking information between processes.
On x86_64 machines the huge pages are 2MB in size, 512 times larger
than a normal 4KB page. Thus, clearing a huge page can delay program
execution by a hundred or more microseconds and maybe noticeable to
latency sensitive programs. This script will tally the number of
times that each process triggers a huge page clear, the total time in
microseconds spent clearing the pages, and the average time in
microseconds of the huge page clear.

# stap hugepage_clear_delays.stp -T 1

memory/hugepage_collapse.stp - Log the kernel collapsing normal pages into a huge page
keywords: memory

The kernel may attempt to group many normal sized pages into a single
huge page to improve TLB performance. This operation may take a
significant amount of time and affect program performance. You can
identify if huge page collapse operations are occurring with the
systemtap hugepage_collapse.stp script.

# stap hugepage_collapse.stp -T 1

memory/hugepage_cow_delays.stp - Summarize the time each process spends doing copy on write for huge pages
keywords: memory

The system may attempt to reduce memory use by having two or more
difference processes share the same writeable page in memory.
However, when one of the processes write to shared page that is
marked copy on write (COW) the page must be duplicated and then
modified. On x86_64 machines the huge pages are 2MB in size, 512
times larger than a normal 4KB page. Thus, copy on write operation
on a huge page can delay program execution by a hundred or more
microseconds and maybe noticeable to latency sensitive programs.
This script will tally the number of times that each process triggers
a huge page copy on write, the total time in microseconds spent
copying the pages, and the average time in microseconds of the huge
page copy.

# stap hugepage_cow_delays.stp -T 1

memory/hugepage_split.stp - Log the kernel splitting huge pages into normal sized pages
keywords: memory

Because some portions of the kernel code only work with normal-sized
pages the kernel may convert a huge page into a set of normal-sized
pages using a split operation. This operation may be relatively
expensive and noticeable to latency sensitive programs. You can
identify if split operations are occurring with the systemtap
hugepage_split.stp script.

# stap hugepage_split.stp -T 1

memory/hw_watch_addr.stp - Watch a Kernel Address Using Breakpoint Hardware
keywords: memory watchpoint

The script will watch accesses to a single kernel address and prints
a traceback each time the address is accessed. This script needs to
be run as root to allow access to the breakpoint hardware.

# stap --all-modules hw_watch_addr.stp 0x`grep "vm_dirty_ratio" \
/proc/kallsyms | awk '{print $1}'` -T 5

memory/hw_watch_sym.stp - Watch a Kernel Symbol Using Breakpoint Hardware
keywords: memory watchpoint

The script will watch accesses to the starting address of a single
kernel symbol and prints a traceback each time the symbol is
accessed. This script needs to be run as root to allow access to the
breakpoint hardware.

# stap --all-modules hw_watch_sym.stp vm_dirty_ratio -T 5

memory/kmalloc-top - Show Paths to Kernel Malloc Invocations
keywords: memory

The kmalloc-top perl program runs a small systemtap script to collect
stack traces for each call to the kmalloc function and counts the
time that each stack trace is observed. When kmalloc-top exits it
prints out sorted list. The output can be filtered to print only the
first N stack traces (-t), stack traces with a minimum counts (-m),
or exclude certain stack traces (-e).

# ./kmalloc-top -c "sleep 1"

memory/last_100_frees.stp - Log recent free(3) calls.
keywords: memory process backtrace

This script reports on the last few free(3) libc calls done by
processes (possibly restricted by stap -x/-c), along with a userspace
backtrace at those moments.

# stap last_100_frees.stp -c "stap -V" -d `which stap` --ldd

memory/mmanonpage.stp - Track Virtual Memory System Actions on Anonymous Pages
keywords: memory

The mmanonpage.stp script uses the virtual memory tracepoints
available in some kernels to track the number of faults, user space
frees, page ins, copy on writes and unmaps for anonymous pages. When
the script is terminated the counts are printed for each process that
allocated pages while the script was running. This script displays
the anonymous page statistics for each process that ran while the
script is active. It's useful in debugging leaks in the anonymous
regions of a process.

# stap mmanonpage.stp -T 1

memory/mmfilepage.stp - Track Virtual Memory System Actions on File Backed Pages
keywords: memory bpf

# stap mmfilepage.stp -T 1

memory/mmreclaim.stp - Track Virtual Memory System Page Reclamation
keywords: memory

The mmreclaim.stp script uses the virtual memory tracepoints
available in some kernels to track page reclaim activity that
occurred while the script was running. It's useful in debugging
performance problems that occur due to page reclamation.

# stap mmreclaim.stp -T 1

memory/mmwriteback.stp - Track Virtual Memory System Writing to Disk
keywords: memory bpf

# stap mmwriteback.stp -T 1

memory/numa_faults.stp - Summarize Process Misses across NUMA Nodes
keywords: memory numa

The numa_faults.stp script tracks the read and write pages faults for
each process. When the script exits it prints out the total read and
write pages faults for each process. The script also provide a break
down of page faults per node for each process. This script is useful
for determining whether the program has good locality (page faults
limited to a single node) on a NUMA computer.

# stap numa_faults.stp -T 1

memory/overcommit.stp - Log Failed Process Memory Allocation Due to Overcommit Limits
keywords: memory limits

The overcommit.stp script prints a line each time the kernel refuses
a memory allocation request from a process because of
/proc/sys/vm/overcommit* limits.

# stap overcommit.stp -T 1

memory/pfaults.stp - Generate Log of Major and Minor Page Faults
keywords: memory

The pfaults.stp script generates a simple log for each major and
minor page fault that occurs on the system. Each line contains a
timestamp (in microseconds) when the page fault servicing was
completed, the pid of the process, the address of the page fault, the
type of access (read or write), the type of fault (major or minor),
and the elapsed time for page fault. This log can be examined to
determine where the page faults are occurring.

# stap pfaults.stp -T 1

memory/vm.tracepoints.stp - Collect Slab Allocation Statistics
keywords: memory statistics

The script will probe all memory slab/slub allocations and collects
information about the size of the object (bytes requested) and
user-space process in execution. When run over a period of time, it
helps to correlate kernel-space memory consumption owing to
user-space processes.

# stap vm.tracepoints.stp -T 10

= MONITORING =

general/graphs.stp - Graphing Disk and CPU Utilization with gnuplot
keywords: monitoring

The script tracks the disk and CPU utilization. It prints a stream
of data which, when piped directly into gnuplot, draws historical
curves for each.

# stap graphs.stp -T 1

general/measureinterval.stp - Measure intervals between events
keywords: monitoring

The measureinteval.stp script allows quick creation of
instrumentation to measure quantity between different probe points,
aggregate the measurements, and display the results. The first
argument to the script is the quantity to measure such as time in
microseconds via "gettimeofday_us()". There could be multiple
intervals being measured concurrently and the second argument is the
means to match the start probe points listed in the fourth argument
with the end probes listed in the fifth argument. The third argument
is how to display the aggregated data. The data could be displayed
as a sum (@sum), an average (@avg), or a histogram (@hist_log). The
fourth and fifth arguments are lists of probes marking the start and
end of an interval. An optional sixth argument allows grouping of
the intervals. One could use "tid()" for the matching argument to
measure the intervals on a per-thread basis, but then use
"execname()" for the optional argument to group the measurements by
executable name. If there is no sixth argument, all the intervals
are aggregated into a single entry.

# stap measureinterval.stp "gettimeofday_us()" "tid()" @sum vm.pagefault \
vm.pagefault.return "execname()" -c 'sleep 3'

general/varwatch.stp - Watch a Variable Changing Value in a Thread
keywords: _best monitoring

# stap -w varwatch.stp 'kernel.statement("do_sys_open@fs/open.c:*")' \
'$$vars' -T 1

general/whythefail.stp - Why did the function fail?
keywords: speculation monitoring function trace _best

The whythefail.stp script prints a statement-execution trace for a
given function, but only for those runs of the function that ended up
with a (configurable) post-return condition.

# stap whythefail.stp kernel do_sys_open '$return < 0' -c 'cat \
/root/no-such-file || true'

io/capture_ssl_master_secrets.stp - Capture SSL/TLS master secrets from gnutls and openssl users
keywords: io monitoring

Capture SSL/TLS master secrets from gnutls and openssl users for easy
traffic decryption

# stap capture_ssl_master_secrets.stp -c 'sleep 3'

io/mbrwatch.stp - Monitor Read/Write of the Boot Sector Area of Block Devices
keywords: io monitoring disk simple

The mbrwatch.stp script reports any attempted reads/writes of the
first few sectors of a raw block device.

# stap mbrwatch.stp -c "dd of=/dev/null count=1 if=/dev/`grep -v major \
/proc/partitions | grep . | grep -v 'sr[0-9]' | awk '{print $4}' | \
head -1`"

io/ttyspy.stp - Monitor TTY Typing
keywords: io tty monitoring guru

The ttyspy.stp script uses tty_audit hooks to monitor recent typing
activity on the system, printing a scrolling record of recent
keystrokes, on a per-tty basis.

# stap --skip-badvars -g ttyspy.stp -T 1

process/auditbt.stp - Generate backtraces for kernel audit events
keywords: monitoring security backtrace

Attaches to the kernel audit-log paths (also used by libaudit), and
log every record being sent, along with a user-space backtrace of the
process that caused it.

# stap auditbt.stp -d /usr/bin/sudo --ldd -c "sudo true"

process/procmod_watcher.stp - Monitor process creation/termination and module [un]loading
keywords: process monitoring syscall tracepoint

The procmod_watcher.stp script monitors calls to fork(), exec(),
exit(), init_module(), and delete_module(). Event-specific details
are also printed out (e.g. for exec(), the file being exec'ed). This
script does not require debuginfo.

# stap procmod_watcher.stp -T 1

= NANOSLEEP =

process/sleeptime.stp - Trace Time Spent in Nanosleep Syscalls
keywords: syscall nanosleep

The script watches each nanosleep syscall on the system. At the end
of each nanosleep syscall the script prints out a line with a
timestamp in microseconds, the pid, the executable name in
parentheses, the "nanosleep:" key, and the duration of the sleep in
microseconds.

# stap sleeptime.stp -T 1

= NETWORK =

lwtools/accept2close-nd.stp - Show socket lifespan, from accept() to close() (non-debuginfo)
keywords: network socket

This traces socket duration from the accept() syscall to close(), and
provides details on the lifespan of these passive connections,
showing the distribution as a histogram.

# stap accept2close-nd.stp -T 1

network/autofs4.stp - Watch autofs4 Operations
keywords: network nfs

Trace key autofs4 operations such as mounting or unmounting remote
filesystems.

# stap autofs4.stp -T 1

network/connect_stat.stp - Show Process Ancestry for IP Connections
keywords: network socket process

The connect_stat.stp script prints a task's entire ancestry (parent
process name/uid/gid) whenever it attempts an outgoing socket
connection to a given IP address.

# stap connect_stat.stp 127.0.0.1 -T 1

network/dropwatch.stp - Watch Where Socket Buffers Are Freed in the Kernel
keywords: network tracepoint socket

Every five seconds the dropwatch.stp script lists the number of
socket buffers freed at locations in the kernel.

# stap dropwatch.stp -T 1

network/net_xmit_json.stp - Tracks time between packet queue and transmit.
keywords: network statistics json

This script tracks time between packet queue and transmit. The
information is provided to userspace via procfs in JSON format.

# stap net_xmit_json.stp -T 1

network/netdev.stp - Trace Activity on Network Devices
keywords: network traffic

The netdev.stp script traces configuration and transmit/receive
activity on network devices.

# stap netdev.stp -T 1

network/netfilter_drop.stp - System-Wide Network Packet Dropping Tool
keywords: network packets guru

# stap -g netfilter_drop.stp TCP 1 -T 2

network/netfilter_summary.stp - System-Wide Count of Network Packets by IPs
keywords: _best network traffic

# stap netfilter_summary.stp -T 1

network/netfilter_summary_json.stp - System-Wide Count of Network Packets by IPs
keywords: _best network traffic json

# stap netfilter_summary_json.stp -T 1

network/nettop.stp - Periodic Listing of Processes Using Network Interfaces
keywords: network traffic

Every five seconds the nettop.stp script prints out a list of
processed (PID and command) with the number of packets sent/received
and the amount of data sent/received by the process during that
interval.

# stap nettop.stp -T 1

network/packet_contents.stp - Network packet contents
keywords: network traffic

The packet_contents.stp script displays the length of each network
packet and its contents in both hexadecimal and ASCII. Systemtap
strings are MAXSTRINGLEN in length by default which may not be enough
for larger packets. In order to print larger packets, this limit can
be increased by passing in the "-DMAXSTRINGLEN=65536" command line
option.

# stap packet_contents.stp -T 1

network/sk_stream_wait_memory.stp - Track Start and Stop of Processes Due to Network Buffer Space
keywords: network tcp process bpf

# stap sk_stream_wait_memory.stp -T 1

network/socket-trace.stp - Trace Functions Called in Network Socket Code
keywords: network socket

The script instruments each of the functions in the Linux kernel's
net/socket.c file. The script prints out trace data. The first
element of a line is time delta in microseconds from the previous
entry. This is followed by the command name and the PID. The "->" and
"<-" indicates function entry and function exit, respectively. The
last element of the line is the function name.

# stap socket-trace.stp -T 1

network/socktop - Periodically Summarize Socket Activity on the System
keywords: network socket

The socktop script periodically prints out a list of the processes
with the highest socket activity. Command line options for the
script allow filtering to focus on particular types of sockets. The
"-h" option lists socktop script's filtering options.

# ./socktop -c 1

network/stp_dump.stp - Dump of STP packets
keywords: network traffic

The stp_dump.stp prints out the packet contents. Each block contains
the STP protocol ID, version ID, flags, root and bridge MAC
addresses, and various times.

# stap stp_dump.stp -T 5

network/tcp_connections.stp - Track Creation of Incoming TCP Connections
keywords: network tcp socket

The tcp_connections.stp script prints information for each new
incoming TCP connection accepted by the computer. The information
includes the UID, the command accepting the connection, the PID of
the command, the port the connection is on, and the IP address of the
originator of the request.

# stap tcp_connections.stp -T 1

network/tcp_init_cwnd.stp - Increase Initial TCP Congestion Window to 10
keywords: network tcp socket guru

# stap -g tcp_init_cwnd.stp -T 1

network/tcp_trace.stp - TCP Connection Tracing Utility
keywords: network trace

This scripts traces a given TCP connection based on the filter
parameters given by the user. The indexing is done by the 4 tuples
local address, remote address, local port, remote port.

# stap tcp_trace.stp 127.0.0.1:*-127.0.0.1:* timeout=1

network/tcpdumplike.stp - Dump of Received UDP/TCP Packets
keywords: network traffic

The tcpdumplike.stp prints out a line for each TCP & UDP packet
received. Each line includes the source and destination IP addresses,
the source and destination ports, and flags.

# stap tcpdumplike.stp -T 1

network/tcpipstat.stp - Display Network Statistics for Individual TCP Sockets
keywords: network statistics

The tcpipstat script collects and displays network statistics related
to individual TCP sockets or groups of sockets. The statistics that
are collected are simular to that of the command netstat -s, only
sorted and grouped by individual sockets.

# stap tcpipstat.stp timeout=1

network/who_sent_it.stp - Trace threads sending network traffic to given host and/or port
keywords: network trace traffic simple

This script traces outgoing network packets using the netfilter
probes (not requiring debuginfo), printing the source thread name/id
and destination host:port. It may be filtered with the_dport and
the_daddr globals, e.g., to watch only for DNS traffic (port 53),
and/or only to the localhost (127.0.0.1).

# stap who_sent_it.stp -G the_dport=53 -c "ping -c 1 sourceware.org || \
true"

= NFS =

network/autofs4.stp - Watch autofs4 Operations
keywords: network nfs

Trace key autofs4 operations such as mounting or unmounting remote
filesystems.

# stap autofs4.stp -T 1

network/nfsd-recent.stp - Keep track of NFS server statistics
keywords: nfs statistics

This script tracks all nfsd server operations by client_ip address,
and periodically lists those clients that have made recent requests.
It's a way of finding out which nfs clients might be considered still
connected.

# stap nfsd-recent.stp -T 1

network/nfsd-trace.stp - Trace NFSD requests with file names.
keywords: nfs trace

This script traces all nfsd server operations by client_ip address,
operation, and complete file name (if possible).

# stap nfsd-trace.stp -T 1

network/nfsd_unlink.stp - Find Which Client Is Removing NFS Files on Server
keywords: nfs disk

The nfsd_unlink.stp script lists the ip address and file name each
time time a file is being removed or unlinked by the nfsd. This
script is run on the nfs server.

# stap nfsd_unlink.stp -T 1

network/nfsdtop.stp - Keep track of NFS server statistics
keywords: nfs statistics

The nfsdtop.stp script gathers and displays NFS lookups,

# stap nfsdtop.stp -T 1

= NUMA =

memory/numa_faults.stp - Summarize Process Misses across NUMA Nodes
keywords: memory numa

# stap numa_faults.stp -T 1

= PACKETS =

network/netfilter_drop.stp - System-Wide Network Packet Dropping Tool
keywords: network packets guru

# stap -g netfilter_drop.stp TCP 1 -T 2

= PROCESS =

general/eventcount.stp - Interactive Count Specified Events
keywords: interactive statistics thread process

# stap eventcount.stp 'syscall_any' -c 'sleep 3'

memory/glibc-malloc.stp - Overview glibc malloc internal operations
keywords: memory process

This script reports on internal statistics of the glibc malloc
implementation, as used by a process restricted by stap -x/-c

# stap glibc-malloc.stp -c 'stap --dump-functions'

memory/last_100_frees.stp - Log recent free(3) calls.
keywords: memory process backtrace

This script reports on the last few free(3) libc calls done by
processes (possibly restricted by stap -x/-c), along with a userspace
backtrace at those moments.

# stap last_100_frees.stp -c "stap -V" -d `which stap` --ldd

network/connect_stat.stp - Show Process Ancestry for IP Connections
keywords: network socket process

The connect_stat.stp script prints a task's entire ancestry (parent
process name/uid/gid) whenever it attempts an outgoing socket
connection to a given IP address.

# stap connect_stat.stp 127.0.0.1 -T 1

network/sk_stream_wait_memory.stp - Track Start and Stop of Processes Due to Network Buffer Space
keywords: network tcp process bpf

# stap sk_stream_wait_memory.stp -T 1

process/cycle_thief.stp - Track IRQ's and Other Processes Stealing Cycles from a Task
keywords: _best process scheduler time tracepoint interrupt

# stap cycle_thief.stp -T 1

process/errsnoop.stp - Tabulate System Call Errors
keywords: process syscall

Prints a periodic tabular report about failing system calls, by
process and by syscall failure. The first optional argument
specifies the reporting interval (in seconds, default 5); the second
optional argument gives a screen height (number of lines in the
report, default 20).

# stap errsnoop.stp 1 10 -T 1

process/forktracker.stp - Trace Creation of Processes
keywords: process scheduler

The forktracker.stp script prints out a time-stamped entry showing
each fork and exec operation on the machine. This can be useful to
determine what process is creating a flurry of short-lived processes.

# stap forktracker.stp -T 1

process/ltrace.stp - uprobes-based ltrace
keywords: process

The ltrace.stp script lists calls that the designated process makes
through PLTs (procedure linkage tables), generally into shared
libraries.

# stap ltrace.stp -c ls || echo PR14738

process/noptrace.stp - Disable ptrace from Hierarchies of Processes
keywords: process security guru

Blocks ptrace(2) attempts from processes identified by stap -c/-x, as
also specifiable from /proc/systemtap/stap_XXX/ control files.
Processes may be added or removed from the blocked list.

# stap -g noptrace.stp -c 'strace ls || true'

process/pfiles.stp - Print Process File Descriptors
keywords: process file

Run pfiles.stp to produce a human-readable summary of all open file
descriptors of a given process. Specify the process-id as -x PID for
fastest performance.

# stap -g pfiles.stp -x $$

process/plimit.stp - Print Resource Limits of Process
keywords: process

The script prints a variety of resource limits for a given pid, like
/proc/$$/limits on recent kernels.

# stap -g plimit.stp $$

process/procmod_watcher.stp - Monitor process creation/termination and module [un]loading
keywords: process monitoring syscall tracepoint

# stap procmod_watcher.stp -T 1

process/proctop.stp - Periodically Print Process Information With History
keywords: process scheduler _best

# stap proctop.stp -T 1

process/psig.stp - Print Process File Descriptors
keywords: process signals

Run psig.stp to produce a human-readable summary of the signal
handling configuration of a given process. Specify the process-id as
-x PID for fastest performance.

# stap -DMAXACTION=10000 -g psig.stp -x $$

process/pstrace_exec.stp - Print trace of process ancestors for matching exec commands
keywords: process backtrace

The pstrace_exec.stp script watches each exec operation. If the exec
contains a substring that matches the script's command-line argument,
it prints out that process and all of its ancestors.

# stap pstrace_exec.stp -T 1 bash

process/pstree.stp - Generates a process diagram in DOT form.
keywords: process diagram

The pstree.stp script generates a process diagram in DOT form. For
instance, it may be useful on a 'make' command to see all the
processes that are started.

# stap pstree.stp -T 1

process/sched-latency.stp - track wakeup-to-dispatch latency stats
keywords: process scheduler time tracepoint

This script periodically reports a histogram of the latency between a
task (thread) being woken up and it actually being dispatched to a
CPU: the amount of time it's spent in the runnable queue.

# stap sched-latency.stp -T 7

process/schedtimes.stp - Track Time Processes Spend in Various States Using Tracepoints
keywords: process scheduler time tracepoint

The schedtimes.stp script instruments the scheduler to track the
amount of time that each process spends in running, sleeping,
queuing, and waiting for io. On exit the script prints out the
accumulated time for each state of processes observed. Optionally,
this script can be used with the '-c' or '-x' options to focus on a
specific PID and its children.

# stap schedtimes.stp -T 1

process/semop-watch.stp - Watch semop(2)/semtimedop(2) operations
keywords: process locking

Prints a timed trace of semop(2)/semtimedop(2) syscalls

# stap semop-watch.stp -c 'sleep 2'

process/spawn_seeker.stp - Track Creation of Processes by process and execname
keywords: process scheduler

The spawn_seeker.stp script every minute (and on exit) prints out the
local time and sorted lists of which processes and executables
spawned tasks during the previous minute. This can be useful to
determine what process is creating a flurry of short-lived processes.
When a process exits its count of tasks created is added to its
parent's count to better account for the indirect task creation by
children processes. For more detailed examination of task creation
consider using forktracker.stp.

# stap spawn_seeker.stp -T 1

process/strace.stp - Trace system calls
keywords: _best process syscall

The script loosely emulates strace, when applied to individual
processes or hierarchies (via -c/-x), or the entire system (without
-c/-x). A few output configuration parameters may be set with -G.

# stap strace.stp -c "cat /proc/sys/vm/* || true"

process/thread-business.stp - monitor syscall history
keywords: _best process syscall

Prints a periodic tabular report about the counts of syscall activity
of all threads on the system, along with a textual
recent-syscall-history for each

# stap thread-business.stp -T 10

process/wait4time.stp - Trace Time Spent in wait4 Syscalls
keywords: syscall process

The script watches each wait4 syscall on the system. At the end of
each wait4 syscall the script prints out a line with a timestamp in
microseconds, the pid, the executable name in parentheses, the
"wait4:" key, the duration of the wait and the PID that the wait4 was
waiting for. If the waited for PID is not specified , it is "-1".

# stap wait4time.stp -T 1

profiling/syscallerrorsbypid.stp - Provide a per-process syscall error tally on the system
keywords: prometheus process syscall tracepoint

The syscallerrorsbypid.stp script tallies syscall errors for each
running process. This information can be useful to whether there are
excessive errors for various processes on the system. The script
makes the information available via procfs in Prometheus readable
format. When a process exits its data will be eliminated from the
prometheus output. To avoid exceeding the storage limitations of
SystemTap older entries maybe overwritten by newer entries. This can
lead to some active process syscall error counts disappearing and/or
later reappearing with a lower value. Also note that the script does
not properly name syscalls for 32-bit applications running on 64-bit
machines.

# stap syscallerrorsbypid.stp -T 1

profiling/syscalllatency.stp - Provide a per-process accumulation of syscall latency on the system
keywords: prometheus process syscall tracepoint

The syscalllatency.stp script accumulates syscall latency for each
running process. This information can be useful to whether excessive
time is being spent in particular syscalls on the system. The script
makes the information available via procfs in Prometheus readable
format. When a process exits its data will be eliminated from the
prometheus output. To avoid exceeding the storage limitations of
SystemTap older entries maybe overwritten by newer entries. This can
lead to some active process syscall error counts disappearing and/or
later reappearing with a lower value. Also note that the script does
not properly name syscalls for 32-bit applications running on 64-bit
machines.

# stap syscalllatency.stp -T 1

profiling/syscallsbypid.stp - Provide a per-process syscall tally on the system
keywords: prometheus process syscall tracepoint

The syscallsbypid.stp script tallies each syscall for each running
process. This information can be useful to determine the activity of
various processes on the system. The script makes the information
available via procfs in Prometheus readable format. When a process
exits its data will be eliminated from the prometheus output. To
avoid exceeding the storage limitations of SystemTap older entries
maybe overwritten by newer entries. This can lead to some active
process syscall counts disappearing and/or later reappearing with a
lower value. Also note that the script does not properly name
syscalls for 32-bit applications running on 64-bit machines.

# stap syscallsbypid.stp -T 1

= PROFILING =

general/tcl-funtop.stp - Profile Tcl calls
keywords: profiling

The tcl-funtop.stp script displays a top-like view of most frequently
used Tcl functions for the each five second interval.

# stap tcl-funtop.stp -T 5

io/iodevstats.stp - List Executables Reading and Writing the Most Data by Device
keywords: io profiling

# stap iodevstats.stp -T 1

io/iostat-scsi.stp - IO Statistics for SCSI Devices
keywords: io profiling scsi

# stap -g iostat-scsi.stp 1 -T 1

io/iostats.stp - List Executables Reading and Writing the Most Data
keywords: io profiling

# stap iostats.stp -T 1

io/iotime.stp - Trace Time Spent in Read and Write for Files
keywords: profiling syscall io file

# stap iotime.stp -T 1

io/nfs_func_users.stp - Tally the Number of NFS Functions Used by Each Process
keywords: io profiling

# stap nfs_func_users.stp -T 1

profiling/container_check.stp - Monitor capabilities and syscalls used by a process and it children
keywords: profiling container syscall

# stap container_check.stp -c "ping -c 1 sourceware.org || true"

profiling/errno.stp - Show Which Processes and System Calls Return Errors Most Frequently
keywords: profiling

On exit the errno.stp script provides a sorted list showing which
combination of PID, system call, and error occur most frequently.

# stap errno.stp -T 1

profiling/fileline-profile.stp - Profile Kernel/User Functions
keywords: profiling

The fileline-profile.stp script ends by printing out a sorted list of
the top twenty kernel and/or user processes providing file:line
information, if available, from the samples addresses gathered over
the time period the script is run. Use any of --ldd, --all-modules,
-d MODULE, -d /PATH/TO/EXEC to add more symbolic info. To include the
symbol name in the output, specify guru mode (-g) and add
symbolname="yes" to the stap command.

# stap fileline-profile.stp -T 6 --all-modules --ldd

profiling/fntimes.stp - Show Functions Taking Longer Than Usual
keywords: _best profiling

# stap fntimes.stp 'kernel.function("sys_*")' -T 7

profiling/functioncallcount.stp - Count Times Functions Are Called
keywords: profiling function

# stap -w functioncallcount.stp "*@mm/*.c" -T 1

profiling/ioctl_handler.stp - Monitor which executables use ioctl syscalls and what kernel code is handling the ioctl
keywords: profiling

The ioctl systemcall is used to manipulate devices setting or special
files. The way that ioctl syscalls are handled depend greatly on the
device the special file is associated with. Using strace to monitor
the open and ioctl syscalls may not give a good indication of what
kernel code is actually handling the ioctl operations. The
ioctl_handler.stp script is designed to provide more details. On exit
the ioctl_handler.stp script provides a count of the ioctl syscalls
for each executable run on the system. If there was some special
device driver code used to handle to the ioctl, the output will have
a tally of the times the function name and module was called for that
executable. The "--all-modules" option should be included on the
command line so the script can provide function name information.

# stap ioctl_handler.stp --all-modules -T 1

profiling/latencytap.stp - Show Reasons and Durations for Processes Sleeping
keywords: _best profiling

# stap latencytap.stp --all-modules -T 1

profiling/linetimes.stp - Show Time Spent on Each Line of a Function
keywords: profiling _best

# stap linetimes.stp kernel do_nanosleep -T 1

profiling/perf.stp - Show performance ratios using perf.counter to access performance counters
keywords: profiling

On exit the perf.stp script provides a sorted list showing cycles per
insn, branches per insn, and cache refs per insn

# stap -w perf.stp -c "find /usr/bin -name \"l*\" -printf \"%h/%f %s %Cx \
%Ck%CM %Y\n\""

profiling/periodic.stp - Show the Period of the Various Timers on the System
keywords: profiling

The periodic.stp script uses the kernel.trace("timer_expire_entry")
tracepoint to collect data on period and frequency of the various
timers on the system. The script displays a sorted list of the
timers observed on the system from most frequent to least frequent.
The script needs to be compiled with the '--all-modules' option to
produce list the function names. Optionally, this script can be used
with a numerical argument to indicate the interval in seconds between
printing output.

# stap periodic.stp --all-modules -T 1

profiling/pf2.stp - Profile Kernel Functions
keywords: profiling

The pf2.stp script sets up time-based sampling. Every five seconds it
prints out a sorted list with the top ten kernel functions with
samples.

# stap pf2.stp -T 1

profiling/pf3.stp - Profile Kernel/User Functions
keywords: profiling

The pf3.stp script sets up time-based sampling. Every five seconds it
prints out a sorted list with the top twenty kernel and/or user
functions with samples. Use any of --ldd, --all-modules, -d MODULE,
-d /PATH/TO/EXEC to add more symbolic info.

# stap pf3.stp -T 6 --all-modules --ldd

profiling/pf4.stp - Profile Kernel/User Backtraces
keywords: _best profiling backtrace

# stap pf4.stp -T 6 --all-modules --ldd

profiling/sched_switch.stp - Display the Task Switches Happening in the Scheduler
keywords: profiling function

# stap sched_switch.stp -T 1

profiling/thread-times.stp - Profile Kernel Functions
keywords: _best profiling

# stap thread-times.stp -T 1

profiling/timeout.stp - Show Processes Doing Polling Operations
keywords: profiling

The timeout.stp script is based on a blog entry
(http://udrepper.livejournal.com/19041.html) mentioning a need for a
tool to help developers find applications that are polling. The
timeout.stp script monitors systemcall used for polling and records
the systemcalls that timed out rather than returned because some
action occurred. The script updates the screen once a second with the
top twenty processes.

# stap timeout.stp -T 1

profiling/topsys.stp - Show Processes Doing Polling Operations
keywords: profiling

The topsys.stp script lists out the top twenty systemcalls for the
previous 5 seconds. The output is sorted from most frequent to least
frequent.

# stap topsys.stp -T 1

profiling/ucalls.stp - Profile method invocations in Java, Perl, Php, Python, Ruby, and Tcl scripts
keywords: profiling syscall

The ucalls.stp script is modeled after the BCC ucalls script
(https://github.com/iovisor/bcc/blob/master/tools/lib/ucalls.py) by
Sasha Goldshtein. The ucalls.stp script monitors the process
indicated by the -x or -c option. When the scripts exits it prints
out information about the number of times that each method is invoked
for code written in Java, Perl, Php, Python, Ruby, and Tcl. Include
the word "syscalls" on the command line to count syscalls invoked by
the process. If you want latency information, include "latency" on
the command line. Note that the latency option does not work for
recursive functions

# stap ucalls.stp syscalls latency -c "python -c 'print(\"hello world\")' \
|| true"

= PROMETHEUS =

general/also_ran.stp - Keep a tally of executables run on the system
keywords: prometheus

The also_ran.stp script tallies each time a executable is started or
a shared library is loaded for execution. This information can be
useful to determine what software is actually being used on the
system. The script makes the information available via procfs in
Prometheus readable format.

# stap also_ran.stp -T 1

general/cpu_throttle.stp - Monitor Intel processors for throttling due to power or thermal limits
keywords: prometheus limits

# stap cpu_throttle.stp -T 1

profiling/syscallerrorsbypid.stp - Provide a per-process syscall error tally on the system
keywords: prometheus process syscall tracepoint

# stap syscallerrorsbypid.stp -T 1

profiling/syscalllatency.stp - Provide a per-process accumulation of syscall latency on the system
keywords: prometheus process syscall tracepoint

# stap syscalllatency.stp -T 1

profiling/syscallsbypid.stp - Provide a per-process syscall tally on the system
keywords: prometheus process syscall tracepoint

# stap syscallsbypid.stp -T 1

profiling/syscallsrw.stp - Provide a tally of read and write syscalls run on the system
keywords: prometheus syscall bpf

The syscallsrw.stp script tallies the read and write syscalls. This
is a demo script for stapbpf prometheus-exporter scripts.

= QEMU =

virtualization/qemu_count.stp - Tally the Number of User-Space QEMU Events
keywords: virtualization qemu kvm

# stap qemu_count.stp -T 1

virtualization/qemu_io.stp - Tally the Number of User-Space QEMU IO on Each IO Port
keywords: virtualization qemu kvm io

# stap qemu_io.stp -T 1

= REGEX =

general/regex.stp - Report opened files whose names match a given regex
keywords: regex

Uses the regex functionality to detect opened files whose names match
a pattern given on the command line. If no command line parameter is
given, demonstrate by filtering for files that end with an extension
showing them to be an archive.

# stap regex.stp -T 1

= RETRANSMISSION =

network/tcp_retransmission.stp - print tcp retransmission packet
keywords: tcp retransmission

The tcp_retransmission.stp prints out a line for each tcp
retransmission packet

# stap tcp_retransmission.stp -T 1

= SCHEDULER =

process/chng_cpu.stp - Monitor Changes in Processor Executing a Task
keywords: scheduler

The chng_cpu.stp script takes an argument which is the executable
name of the task it should monitor. Each time a task with that
executable name is found running on a different processor, the script
prints out the thread id (tid), the executable name, the processor
now running the task, the thread state, and a backtrace showing the
kernel functions that triggered the running of the task on the
processor.

# stap chng_cpu.stp -T 1 bash

process/cycle_thief.stp - Track IRQ's and Other Processes Stealing Cycles from a Task
keywords: _best process scheduler time tracepoint interrupt

# stap cycle_thief.stp -T 1

process/forktracker.stp - Trace Creation of Processes
keywords: process scheduler

# stap forktracker.stp -T 1

process/migrate.stp - Track the Migration of Specific Executables
keywords: scheduler

The migrate.stp script takes an argument which is the executable name
of the task it should monitor. Each time a task with that executable
name migrates between processors an entry is printed with the process
id (pid), the executable name, the processor off loading the task,
and the process taking the task. Note that the task may or may not be
executing at the time of the migration.

# stap migrate.stp -T 1 bash

process/proctop.stp - Periodically Print Process Information With History
keywords: process scheduler _best

# stap proctop.stp -T 1

process/sched-latency.stp - track wakeup-to-dispatch latency stats
keywords: process scheduler time tracepoint

This script periodically reports a histogram of the latency between a
task (thread) being woken up and it actually being dispatched to a
CPU: the amount of time it's spent in the runnable queue.

# stap sched-latency.stp -T 7

process/schedtimes.stp - Track Time Processes Spend in Various States Using Tracepoints
keywords: process scheduler time tracepoint

# stap schedtimes.stp -T 1

process/sleepingBeauties.stp - Generate Backtraces of Threads Waiting for IO Operations
keywords: io scheduler backtrace

# stap sleepingBeauties.stp -T 1

process/spawn_seeker.stp - Track Creation of Processes by process and execname
keywords: process scheduler

# stap spawn_seeker.stp -T 1

= SCSI =

io/iostat-scsi.stp - IO Statistics for SCSI Devices
keywords: io profiling scsi

# stap -g iostat-scsi.stp 1 -T 1

= SECURITY =